NASTF VSP · ALOA Certified · Mobile 24/7

Car Locksmith in Kendall, FL: Fobs Bought Online, Car Keys and Locks

Bought a fob online, lost your last key, or need a spare before that happens? The van comes to the car in Kendall, matches the fob to the vehicle and programs it there, and takes care of home and office locks as well, any hour.

A wrapped 4Keys Locksmith vehicle, silver underneath with blue and black panels advertising Car Key Made, Car Computer, Residential and Commercial, alone in front of a blue backdrop

Miami-Dade License #LK-094576

Held by Qorinca LLC

15,000+ jobs completed

Same Day Solutions

Rapid Mobile Dispatch

Arrival in 30 min

NASTF VSP

Vehicle Security Professional

9-sec avg phone answer

ALOA Certified

Pro Certified Technicians

25 technicians on rotation

Kendall, Miami-Dade County

A car locksmith for Kendall that brings the programmer to the parking space

4Keys Locksmith programs key fobs that Kendall drivers bought online, at the car and around the clock, as a mobile locksmith that holds NASTF VSP authorization and ALOA certification and is insured and bonded, operated by Qorinca LLC under Miami-Dade County locksmith license LK-094576. The same van cuts keys by code, repairs ignitions and works on house and business locks. It has no storefront, which is the point of a mobile locksmith: it reaches a Kendall address in typically 15 to 30 minutes, and the dispatcher gives you the time when you call.

Car work leads this page. Then comes the topic Kendall gets in depth: what decides whether a fob from an online listing will work in your car, how to read that off the fob before you pay for it, and what happens when the fob turns out to be used. House and business locks follow, then the roads and ZIP codes the vans cover.

Every job is priced on the phone before a technician is dispatched. The amount depends on the key or fob, the programming route and the hour, and the reference rates sit on the pricing page. Calls are answered in English and Spanish.

Car Locksmith Service

What the van does for a car in Kendall, from a lockout to a new smart key

Each card says what the service is, what changes it, and what to have in hand when you call.

Fob and smart key programming

Keys with a remote in the head, switchblade keys and push-to-start fobs are enrolled with the car where it is parked, whether 4Keys supplies the fob or you bought it. Your own fob is programmed when its FCC ID, frequency and part number match the car, explained below. A fob that works but lost its pairing is re-registered; a fob with a history of failing gets a new replacement under the 4Keys warranty, and the Miramar page covers that choice. See smart key fob programming.

Spares, cloned or programmed

Copying a key you still have can mean cloning its chip or enrolling a second chip with the car; the Pembroke Pines page explains the difference. Either way the blade is cut in the van. Service: car key duplication.

No key left at all

With nothing left to copy, a new blade comes from the key code and a fresh transponder is enrolled, more work than a duplicate and quoted accordingly; the Hialeah page covers it in depth. Your model year decides the route, which the dispatcher confirms on the call while requesting the documents the case requires. Start at all keys lost or lost car key replacement.

Locked out of the car

Entry tools open the door so the keys can be taken out of the cabin or trunk. Tell the dispatcher the deck level or the lot row; the Miami Gardens page describes the entry methods. Service: car lockout service; keys in the trunk: trunk lockout.

Ignition and broken keys

An ignition that will not turn, a key that spins, or a blade that snapped in the cylinder are checked at the column; read key will not turn and a key broken in the ignition. Services: ignition repair and broken key extraction; in depth on the Hollywood page and the North Miami page.

Module programming

After a shop installs a new BCM, ECU or immobilizer module, the technician pairs it with the car and the keys on site using dealer-level software. The Doral page owns that subject; the service page is programming ECUs and modules.

Company vehicles

Pickups and cargo vans are keyed one after another while the crew is in the yard. Have the VINs ready. Fleet key control has its own page, Opa-locka, and the service is fleet and van key programming.

Dealer-level access, six origins

American, German, Japanese, Korean, British and Italian makes are programmed with dealer-level software under NASTF VSP, which answers whether a locksmith has dealer software. European systems are detailed on the Bay Harbor Islands page; see luxury key programming.
Fob Bought Online, In Depth

Programming a key fob you bought online: FCC ID, frequency, part number, and the used-fob problem

A fob from an online listing either becomes a working key for your car or stays a piece of plastic, and the difference is written on it before you open the box. Three identifiers decide it: the FCC ID, the frequency, and the manufacturer's part number, with the chip inside following from them. 4Keys Locksmith programs a fob you bought yourself in Kendall when those three match the car, at the car, with the dealer never involved.

The FCC ID. The FCC ID is printed on the fob housing, on the back of the case or under the battery cover, and it is the identifier the parts catalogs use to match a replacement fob to a car. A listing that says it fits your model but shows a different FCC ID from your original is not the same transmitter. The Honda remote-head key with FCC ID MLBHLIK6-1T, for example, is listed for the Accord 2013-2015 and the Civic 2014-2015 with a G chip (ID47), on 315 MHz, and a CR1620 battery: that combination, not the look of the buttons, is what the car responds to.

The frequency. Many fobs for North American cars transmit on 315 MHz, while European fobs and some newer North American ones use 433.92 MHz. The change can happen inside a single model: key vendors list the Acura TLX smart key KR5V1X at 315 MHz for 2015-2017 and the KR5V2X at 434 MHz for 2018-2020, and the Lexus RX350 fob for 2023-2025 (HYQ14FLD) at 434 MHz. A fob on the wrong frequency can look identical to yours and the car will simply never hear it.

The part number and the chip. Fobs that share a shell can carry different electronics. An H-chip remote-head key sold for the Camry 2014-2017 and the Corolla 2014-2019 is described by its vendor as unsuited to versions with push-button start, which use a smart key instead. The Lexus RX350 for 2020-2021 appears under two FCC IDs, HYQ14FBB and HYQ14FLB, so the safe match is the one printed on your own fob. When the part number from the original key matches the listing, the remaining question is how the car accepts it.

Used fobs. A fob pulled from another car has already been registered to that car's immobilizer, and some systems never release it. Lexus service bulletin L-SB-0014-18, covering the ES350 2019-2021 and the LS500 2018-2021, states that keys erased in a reset or removed from the car can never be reused, and vendors sell the LS500 fob as non-reusable; earlier Lexus smart keys are sold as reusable only after an immobilizer reset. When the fob you bought turns out to be used and paired elsewhere, 4Keys programs a new fob instead, because a revived used fob is not something the company puts its warranty on.

How it gets programmed. Some cars let an owner pair the remote buttons with a routine at the driver's seat, and the STRATTEC catalog lists such routines for Honda remotes on some years, but the Honda immobilizer side still needs a programming tool. For the Lexus smart keys above, no on-board procedure exists at all, and the Mercedes-Benz FBS4 smart key (FCC NBGDM3, E-Class 2013-2020) is described by its vendor as programmable only with a dealer tool. That is where dealer-level software under NASTF VSP comes in, and why the technician brings it to the car. Some procedures erase every key not present, so have every key you want to keep. More on the general case at the full guide to fobs bought online and key fob not working.

Look-Alike Fobs

Fobs that look the same and are not interchangeable

Model years and part identifiers copied from the vendor listings and the Lexus bulletin. On the call, the dispatcher checks your fob and VIN against them.

VehicleYears listedFob and identifiersWhat it means for a fob bought online
Honda Accord / Civic2013-2015 / 2014-2015Remote-head key, FCC ID MLBHLIK6-1T, 315 MHz, G chip (ID47)Match the FCC ID and the chip; the remote and the immobilizer are programmed as separate steps.
Acura TLX2015-2017Smart key KR5V1X, 315 MHz, ID47Will not answer a 2018 or later TLX, which listens on 434 MHz.
Acura TLX2018-2020Smart key KR5V2X / KR5V21, 434 MHz, ID47Same shape as the earlier fob; read the FCC ID before ordering.
Toyota Camry / Corolla2014-2017 / 2014-2019H-chip remote-head key (HYQ12BEL / HYQ12BDM)For turn-key versions; the vendor lists it as not for push-button start.
Lexus RX3502020-2021Smart key, listed under HYQ14FBB and HYQ14FLBTwo FCC IDs for the same years: copy the one printed on your fob.
Lexus RX3502023-2025Smart key HYQ14FLD, 434 MHzA fob from an earlier RX on 315 MHz is a different part.
Lexus ES350 / LS5002019-2021 / 2018-2021Smart key under bulletin L-SB-0014-18Erased or removed keys can never be reused: buy new, not used.
Mercedes-Benz E-Class2013-2020FBS4 smart key, FCC NBGDM3, 315 MHzProgrammed with dealer-level tools only, under NASTF VSP.

Sources: Honda, Acura, Toyota, Lexus and Mercedes-Benz key vendor listings and Lexus L-SB-0014-18, compiled in the 4Keys technical fact sheets. Six origins are covered, American through Italian.

Before You Order

Five things to read off a fob before you pay for it or call

Do this with your original key in one hand and the listing open in the other.

  1. 1

    Find the FCC ID on your original

    Look on the back of the case, or open the battery cover. Write it down exactly, letters and digits, and compare it with the FCC ID shown in the listing photos, not only in its title.

  2. 2

    Match the part number

    Many fobs also carry the manufacturer part number on the case or the inner board. When the listing gives one, it should be the same as yours or listed as its direct replacement.

  3. 3

    Check frequency, buttons and start type

    Confirm the listing states the same frequency as your car (315 or 433.92 MHz), the same buttons (a hatch or remote-start button is part of the match), and the same start type: turn key or push button.

  4. 4

    Ask whether it is new or used

    A used or refurbished fob may already be locked to another car. If the listing does not say new, ask the seller before buying, because some systems will never accept a fob registered elsewhere.

  5. 5

    Call before the fob arrives

    Give the dispatcher three things: the code printed as FCC ID, the part number, and your VIN or model year. 4Keys confirms whether the fob fits before you spend on it, and when it does not, a matching new fob is loaded on the van instead.

The fob matches but the car ignores it? Two systems, two different fixes.

A fob does two separate jobs. Its buttons talk to the remote keyless entry (RKE) receiver, which locks and unlocks the doors; its transponder chip, or the proximity signal on a push-button car, talks to the immobilizer, which decides whether the engine runs. Doors that respond while the engine will not start point to the immobilizer side; an engine that starts with the blade while the buttons do nothing points to the remote side; and two fobs that die at the same moment point to the car rather than the fobs. Tell the dispatcher which of those you see, and read key fob not working first.

Residential Locksmith

Kendall homes, townhouses and apartments: the locks on the door

Six home services and what to tell the dispatcher for each.

Locked out at home

Entry is made through the door you pick, by working whatever lock it has, and if the key is lost rather than locked inside, the cylinder can be rekeyed before leaving. In a gated community, give the gate code or meet the van. Night calls are emergency locksmith service.

Rekey after a move

The pins are changed so earlier keys stop working and the doors share one new key. Deciding between rekeying and replacing after a purchase is covered on the Miami Shores page.

Lock changes and deadbolts

Worn hardware comes off and new pieces go into the holes already in the door. A first deadbolt, with its strike screwed into the framing, is explained on the Pinecrest page. See residential locksmith service.

Smart locks

Code and app deadbolts mounted where the old lock sat if the model fits, and set up before the technician leaves, so a lost house key stops being an emergency. What a lease or an association allows is on the Midtown Miami page.

Sliding patio doors

Sliders that will not latch, and second locks for them, are covered on the Palmetto Bay page. Mention the slider when you book.

Apartments with a master key

Unit locks in a building on a master system are rekeyed within that system; the Edgewater page explains how. Check with management first.
Commercial Locksmith

Business locks around Kendall: offices, clinics and retail bays

Control over who opens which door, adjusted when it needs to change.

Rekey when staff change

The cylinders a former employee's key could open are rekeyed in one visit. See commercial locksmith service.

Master keying

Masters, sub-masters and change keys recorded on a key chart; planning a master key system is a guide of its own.

Access control

Card, fob and keypad entry on staff doors. Revoking a credential is explained on the Downtown Miami page.

Exit devices

Panic bars put in new, or freed up when one jams or no longer catches, with outside trim and a cylinder where staff need to enter. Give the door width and material, and say whether the door has a closer.

Storefront doors

Retail entries in aluminum frames take thin-profile deadlocks; the Wynwood page covers their hardware.

After-hours lockout

The person responsible for the premises gets back inside at whatever hour it happens, with a rekey on that visit if a key is unaccounted for, so the next shift opens with keys that only the right people hold.
Service Area

Kendall by road and ZIP code, so the technician finds the car

4Keys Locksmith covers Kendall in ZIP codes 33156, 33173, 33176, 33183 and 33186, in unincorporated Miami-Dade County. The spine is Kendall Drive, SR 94 and SW 88th Street, which runs 10.7 miles from Krome Avenue in the west to US 1 on the line with Pinecrest. Give the address and the nearest cross avenue, since Kendall streets and avenues are numbered.

The expressways bring the van in from every side. The Palmetto Expressway (SR 826) has its Kendall Drive interchange less than a mile north of US 1; the Don Shula Expressway (SR 874) has interchanges at Kendall Drive and at Killian Parkway, which is SW 104th Street, and meets the Snapper Creek Expressway (SR 878) in Kendall; and the Homestead Extension of Florida's Turnpike leaves at exit 20 for Kendall Drive. Calls just east and south go to the same dispatch: Pinecrest across US 1 and Palmetto Bay to the southeast.

Where the car is parked shapes the visit. For a car on an upper floor of a retail or medical parking structure, name the floor and the bay; the fob gets programmed right there. A college campus lot needs the lot name. Gated townhouse and apartment communities need an entry code or a resident to let the van through, and an office or medical building along US 1 can combine a car key with readers, exit devices and an override key in one trip.

FAQ - Kendall Car Locksmith and Key Fob Questions

Fobs ordered online, dealer versus locksmith, used fobs, fobs that lose their programming, keys that must be present, and getting to your car in Kendall.

Yes. 4Keys Locksmith programs a fob you bought yourself, at your car in Kendall, when its FCC ID, frequency and part number match the vehicle. Read those to the dispatcher before the visit. Should it prove to be the wrong part, or one already tied to another vehicle, 4Keys supplies a correct new fob instead, and the replacement is covered under warranty by 4Keys.
No. A locksmith with the right equipment and access programs the same fobs a dealer does. 4Keys is NASTF VSP authorized and uses dealer-level software, so fobs that need the manufacturer data, such as smart keys with no on-board procedure, are programmed at the car without a tow to the dealer.
Compare the FCC ID printed on your original fob with the one in the listing photos, then the part number, the frequency (315 or 433.92 MHz), the buttons, and whether your car starts with a turn key or a push button. If any of them differ, it is a different part. The dispatcher can check a listing against your VIN before you buy.
Some can be erased and re-registered, others never can. Lexus, for one, states in bulletin L-SB-0014-18 that keys removed from its 2018-2021 LS500 and 2019-2021 ES350 can never be reused. When a used fob turns out to be paired elsewhere, 4Keys programs a new fob instead, because a revived used fob is not covered by warranty.
A fob can stop being recognized, for example after a battery change on a car that needs the remote re-synced, or after a fault in the fob. A fob that is sound and simply lost its pairing is re-registered to the car. One that keeps failing is not revived: 4Keys fits a new fob, backed by its warranty. The Miramar page goes through how to tell the two apart.
It can. Bring every key and fob you want to keep using, because some programming procedures erase every key that is not present and then register only the ones in the car, so a spare left at home could stop working.
Check the basics first: the right coin cell, inserted the right way up, with the contact spring touching it. Some cars need the remote re-synced after the battery is out. If the doors respond but the car will not start, the problem is on the immobilizer side, which is a programming job.
It can be, when the listing matches your original on FCC ID, part number, frequency and buttons, and the fob is new. The programming is quoted on the phone either way. A supplied fob is matched to your VIN before the visit and is covered by the 4Keys warranty, which a used or mismatched fob from a listing is not.
Your VIN, or the model and its year, the number of keys that still start the car, and the FCC ID and part number of any fob you bought. The dispatcher requests the documents the case requires on that same call.
Yes. Tell the dispatcher the floor and bay number of the structure and the work happens beside the car. Behind a gate, share the code when you call, or walk out to let the van in.
Kendall · Fobs and Keys · 24/7

Have the fob in your hand? Read us the FCC ID.

Have the fob code, its part number and the car model handy. You get the match and the price on that call, before a van heads to Kendall.

Call Us NowWhatsApp Us